GAP POWER
Update March 2019

The GAP Generator with no moving parts
Electricity for the future

 

Home Page

Videos Page

Photos

Fasteners

Parts List

Replications by Others

Contact us

Links to other sites

Drawings

 

The GAP Generator
Latest tests done March 2019

One night while sleeping I awoke with the following on my mind. ELECTRICAL COILS ARE LIKE BALLOONS. After thinking on that a few minutes, I decided to do some more testing. Knowing most people do not have, or have access to, an oscilloscope, I decided to use regular volt and amp meters while testing. Just in case someone wants to duplicate these tests. After testing I decided the information would be very useful for others to know so, I put that information into a pdf file. It contains six tests along with very detailed explanations.

I got to thinking of how I could demonstrate what the maximum possible watts input to the coils of The GAP Generator could be. I'd like to say that I came up with a good way of testing but, like before, I awoke in the middle of the night with the answer. The test proved to be very good so, I added it to the pdf file. Like the other tests, I explain this one with great detail.

It's my hope others will see this, duplicate the tests, and verify this information to be true.

Click here to see the pdf file. You can right click on mouse, then left click Save target as, and save it to your computer. The pdf file contains eight, (8), pages.

I also made a video demonstrating balloon power. You may find it interesting. It's only 2.45 minutes long. Click here to watch it. Be sure to look at both the pdf file and the video. One compliments the other.

I found a web-site that has the following information about my early work. It was just one of many. The article is called, A Practical Guide to Free Energy Devices. Chapter 2: Moving Pulsed Systems. It's authored by Patrick J. Kelly This person explains in great technical detail what is happening. It's obvious he is a very bright individual.  His article is below in black.

Art Porter. Art uses an electromagnet with a ring magnet mounted on the core. When the coil is pulsed so as to augment the field of the permanent magnet, Art says that his prototype produces 2.9 times the field strength of the permanent magnet on it’s own. When the coil is pulsed in the direction which opposes the field of the permanent magnet, the resulting magnetic field is zero.

This is a very serious change of magnetic field which can be used in different applications. One which Art has implemented is using the arrangement to power a crankshaft motor. Art shows several different motor builds including this one:

With this arrangement, Art states that 95% of the motor power comes from the permanent magnet. Art’s website is here and he has a very interesting, lengthy video showing all of the details here.

In the video, Art attempts to apply Ohm’s Law in an attempt to analyze the operation and is puzzled when the oscilloscope readings do not match his Ohm’s Law calculations. He thinks that there is a contradiction between the oscilloscope and Ohm’s Law, which he repeatedly stresses is a law of Nature, and he concludes that one of them has to be wrong. In actual fact, neither are wrong because Ohm’s Law only applies to DC current flow in resistive circuits, and Art is not using steady DC current or a resistive load.

Applying short DC pulses to a substantial coil of wire is the equivalent of applying AC to that inductor. Ohm’s Law does not apply due to the inductance of the coil. There is a Power Factor involved and Back EMF voltage pulses, so the oscilloscope readings are what is needed to calculate the input and output powers.

This arrangement is almost identical to that used in the Charles Flynn magnet motor described in chapter 1, and very close to the techniques used by Robert Adams in a properly tuned Adams Motor as shown at the start of this chapter. In my opinion, the effect which Art is exploiting would best be used if a large pick-up coil is placed against the end of the electromagnet core and the drive coil pulsed at the coil’s (high) resonant frequency as that will minimize the input power and maximize the output power. Stacking those units in a bank could well produce a very sizeable excess electrical output. Our thanks are due to Art and his colleagues for sharing their research work freely for others to replicate and progress further.

Click on this link   http://www.free_energy_info.com/Chapt2.html    to see his examination of many many other works including mine.

Let me know what you think.

Art

 

A Truth About Electric Motors.

They don't operate on electricity. They run on magnetism. The magnetism they run on is produced by electricity.

Like a battery stores electricity, a permanent magnet stores magnetism. Unlike a battery, it's possible the magnet may never run down. 

Web design by Art Porter
 © - 2009-2019